Kia Rio: Removal
| 1. |
Remove the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
|
| 2. |
Remove the clutch cover bolts. Be careful not to be bent ortwist
bolts. Loosen bolts in diagonal directions.
|
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...
Inspection
1.
Inspect diaphragm spring wear which is in contact with a concentric
slave cylinder bearing.
2.
Check the clutch cover and disc surface f ...
See also:
Components Location
1. Sub frame
2. Drive shaft
3. Lower arm
4. Strut assembly
5. Steering gearbox
6. Stabilizer bar
...
Front Fog Lamps Removal
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the fog lamp connector (A).
3.
Remove t ...
Photo Sensor (FATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of defrost no ...
Copyright © www.kirmanual.com 2014-2024