Kia Rio: Removal
|
| 1. |
Disconnect the ignition lock switch connector (A) and clutch switch
(B).
|
| 2. |
Disconnect the push rod (B) from the clutch pedal by removing
the snap pin (A) and washer.
|
| 3. |
Remove the clutch pedal mounting nuts (A-4ea).
|
| 4. |
Remove the clutch pedal assembly.
|
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floorboard) and the clutch pedal clevis pin play (measured at
the ...
Installation
1.
Installation is in reverse order of removal.
...
See also:
Child restraint system
Children riding in the car should sit in the rear seat and must always be properly
restrained to minimize the risk of injury in an accident, sudden stop or sudden
maneuver. According to accident s ...
Smart key unit Circuit diagram
No.
Connector A(26 pins)
No.
Connector B(16 pins)
No.
Connector C(22 pins)
1
VBAT_LOAD
1
C_CAN_L
1
O_S ...
Emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...
Copyright © www.kirmanual.com 2014-2024