|
1. |
Disconnect the push rod (B) from the clutch pedal by removing
the snap pin (A) and washer.
|
2. |
Remove the clutch pedal mounting nuts (B-3ea).
|
3. |
Remove the battery and ECM.
(Refer to "Manual transaxle system" in MT group)
|
4. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
5. |
Remove the clutch master cylinder by turning it clockwise (A).
|
AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending
on equipment and requirements. AGM stands for Absorbent Glass Material Battery;
that is absorbent glass fibre fl ...
Spark Plug: Installation
1.
Install in the reverse order of removal.
Spark Plug Installation :
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...