Kia Rio: Removal
| 1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
| 2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 3. |
(Refer to “Air bag module / DAB” in RT group)
Remove the airbag module.
|
| 4. |
Disconnect the lock nut (A) & connector (B) and then remove the
steering wheel by using special service tools. (09561-11001)
|
| 5. |
Installation is the reverse of the removal.
|
Component
1. Remote control assembly
2. Airbag module
3. Wiring
4. Heated steering control unit
5. Steering wheel body
6. Lower cover
...
Disaseembly
1.
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
2.
Disconnect the heated steering wheel unit ...
See also:
Installation
1.
Installation is the reverse of removal.
Use a new washer (A) whenever ...
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...
Copyright © www.kirmanual.com 2014-2024