Kia Rio: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the seat belt after pushing the lock pin (A).
|
| 3. |
Remove the door scuff trim.
(Refer to the Body group - "Interior trim")
|
| 4. |
Remove the center pillar trim.
(Refer to the Body group - "Interior trim")
|
| 5. |
Remove the upper anchor bolt.
|
| 6. |
Disconnect the seat belt pretensioner connector (A).
|
| 7. |
Loosen the seat belt pretensioner mounting bolts (B, C) and remove
the seat belt pretensioner.
|
Components
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Emergency Towing
There are three popular methods of towing a vehicle :
-
The operator loads the vehicle on the back of truck. This is best
way of transporting the vehicle.
...
Multimedia Jack Removal
1.
Using a screwdriver or remover, remove the multimidia jack assembly.
...
Rain Sensor Installation
•
In case of the windshield with reflection layer which
reflects the infrared rays in se ...
Copyright © www.kirmanual.com 2014-2024