1. |
Turn ignition switch OFF.
|
2. |
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
|
3. |
Remove the shower duct (A).
|
4. |
Disconnect the stop lamp switch connector (A).
|
5. |
Remove the shift lock cable (B) after removing the snap pin and
the clip.
|
6. |
Remove the BCM.
(Refer to the Body Electrical group - "BCM")
|
7. |
Remove the mounting bracket bolts (A).
|
8. |
Remove the snap pin (A) and clevis pin (B).
|
9. |
Remove the brake pedal member assembly mounting nuts (A) and then
remove the brake pedal assembly.
|
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Smart key unit
4. Interior antenna 1
5. Interior antenna 2
6. Trunk antenna
7. Door handle & door antenna
8. Bumper ante ...
Front Seat Belt Replacement
Front Seat Belt Replacement
•
When installing the belt, make sure not to damaged the
...
Valve Body Components Location
1. PCV adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & reverse brake(LR/B) pressure flow hole
6. Under drive brake (UD/B) pressur ...