Kia Rio: Removal
| 1. |
Remove the rear wheel & tire.
|
| 2. |
Remove the parking brake cable (A), after removing the clip (B).
|
| 3. |
Remove the hose eyebolt (B).
|
| 4. |
Loosen the caliper mounting bolts (C), then remove the rear caliper
assembly (A).
|
| 5. |
Remove the rear brake disc by loosening the screws (A).
|
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Replacement
Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper
body (A).
Tightening torque:
21.6 ~ 31 ...
See also:
Seat Belt Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
Room Lamp Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove room lamp lens (B).
3.
Remove ...
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Pressure Side Impact Sensor (P-SIS)
6. Side Impact Sensor (SIS)
7. Side Airbag ...
Copyright © www.kirmanual.com 2014-2024