|
1. |
Release the parking brake.
|
2. |
Remove the rear wheel & tire.
|
3. |
Remove the rear brake drum (A).
|
4. |
Remove the upper return spring (A).
|
5. |
Remove the lower return spring (B).
|
6. |
Remove the shoe hold springs (A) and shoe hold pins (B) and then
remove brake shoe (C). Make sure not to damage the dust cover on the
wheel cylinder.
|
7. |
Remove the parking brake cable (A) and then remove brake shoe
(B).
|
8. |
Disconnect brake tubes (A) from the wheel cylinder (B).
|
9. |
Remove the bolt (C) and the wheel cylinder (B) from the backing
plate (D).
|
Tail Gate Replacement
Tail Gate Assembly Replacement
•
When removing and installing the tail gate, an assistant ...
Installation
1.
Install in the reverse order of removal.
...