Rear Disc Brake Type |
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
1. |
Remove the floor console.
(Refer to Body group - "Floor console")
|
2. |
Disconnect the connector (A) of parking brake switch.
|
3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
4. |
Remove the parking brake lever assembly after removing the bolts
(A).
|
5. |
Raise the vehicle, and make sure it is securely supported.
|
6. |
Remove the rear tire and wheel.
|
7. |
Remove the parking brake cable (A), after removing the clip (B).
|
8. |
Loosen the parking brake cable bracket bolts and remove the parking
brake cable.
|
Rear Drum Brake Type |
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
1. |
Remove the floor console.
(Refer to Body group - "Floor console")
|
2. |
Disconnect the connector (A) of parking brake switch.
|
3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
4. |
Remove the parking brake lever assembly after removing the bolts
(A).
|
5. |
Raise the vehicle, and make sure it is securely supported.
|
6. |
Remove the rear tire and wheel.
|
7. |
Remove the parking brake cable from the brake shoe. (Refer to
the rear drum brake)
|
8. |
Remove the parking brake cable (A), after removing the clip (B).
|
9. |
Loosen the parking brake cable bracket bolts and remove the parking
brake cable.
|
Ignition Coil: Description
An ignition coil is an induction coil in an engine's ignition system which
transforms the battery's low voltage to the high voltage needed to create an
electric spark in the spark plu ...
Installation
•
Install the component with the specified torques.
•
...
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting nuts and connector.
3.
...