Kia Rio: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the engine coolant temperature sensor connector (A).
|
| 3. |
Supplement the engine coolant (Refer to “Cooling System” in EM
group).
|
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Installation
•
Install the component with the specified torques.
•
...
See also:
Removal
1.
Disconnect the battery negative terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
Power Door Lock Switch Installation
1.
Install the power window switch module.
2.
Install the door trim panel after reconnecting the relevant connectors
...
Rear Shock Absorber Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston and check that there is no abnormal
resistance or unus ...
Copyright © www.kirmanual.com 2014-2024