Kia Rio: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
| 3. |
Remove the intake manifold (Refer to “Intake And Exhaust System”
in EM group).
|
| 4. |
Disconnect the rail pressure sensor connector (A), and then remove
the sensor (B) from the delivery pipe.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine
speed.
...
Installation
•
Install the component with the specified torques.
•
...
See also:
Reassembly
1.
Reassemble in the reverse order of disassembly.
•
...
Interior overview
1. Door lock/unlock button
2. Central door lock switch
3. Power window switches
4. Power window lock button
5. Outside rearview mirror control switch
6. Hood release lever
7. Fuel filler lid r ...
Appearance care
Exterior care
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the lab ...
Copyright © www.kirmanual.com 2014-2024