Front Brake Pads |
1. |
Remove the brake hose mounting bracket bolt (A).
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper (C) up out
of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
Head Lamps Removal
Head Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the radiator grille upper cover (A), after loosening the
mounting ...
Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Brake Switch Removal
1.
Turn ignition switch OFF.
2.
Remove the crash pad lower panel. (Refer to the Body group-"crash
pad")
3.
...