Kia Rio Manuals

Kia Rio: Replacement - Rear Disc Brake - Brake System - Kia Rio UB 2012-2024 Service ManualKia Rio: Replacement

Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper body (A).
Tightening torque:
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~23.1 lb-ft)



     
•
Where necessary prevent the guide rods from rotating with an appropriate wrench.
•
Be careful not to damage the dust covers.
2.
Replace pad retainers (A) and brake pads (B) in the caliper carrier (C).



     
•
Clean the pad retainer surface at the caliper bracket.
•
Inspect the piston boots for damage and replace if necessary.
•
Check the smooth action of the guide rods, and their dust covers for damage.
Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Inspection
Rear Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

See also:

Troubleshooting
Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) is blown Check for short and replace fuse Speedometer faulty ...

Parking brake
Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alone shou ...

Fluid Service Adjustment Procedure
Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

Categories


Copyright © www.kirmanual.com 2014-2024