Kia Rio: Specifications
| Items |
Specifications |
|
| Rated voltage |
DC 12V |
|
| Operating temperature range |
-30°C ~ +80°C (-22 ~ +176°F) |
|
| Rated load |
Dimmer and passing switch |
High : 1A (Lamp load) Low : 1A (Lamp load) Passing : 1A (Lamp load) |
| Lighting switch |
1A (Lamp load) |
|
| Turn signal & lane change switch |
6.6 ± 0.5A (Lamp load) |
|
| Front & rear fog lamp switch |
1A (Relay load) |
|
| Wiper & mist switch |
Mist, Low, High : 4A (Motor load) Intermittent : 0.22 ± 0.05 A (Relay load) Lock : 28 A (Motor load) |
|
| Front & Rear washer switch |
5 A (Motor load) |
|
| Variable intermittent volume switch (Rain Sensor) |
Max. 25 mA |
|
| Rear wiper switch |
0.2A (Relay load) |
|
Component(1)
※ Installation order : A → B → C → D → E
1. Steering column shaft
2. Lighting switch
3. Wiper and washer switch
4. Screw
5. Steering angle ...
See also:
Rear Hub - Carrier Replacement
[Drum Type]
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Signal Waveform
...
Copyright © www.kirmanual.com 2014-2024