Kia Rio: Inspection

Horn Inspection

Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal.

1 : 12V Ground(-)

2 : 12V (+)

The horn should make a sound. If the horn fails to make a sound, replace it.

Component Location

1. Horn switch 2. Horn relay (Egine Room Relay) 3. Horn 4. Clock spring ...

Removal

1. Remove the under cover. 2. Remove the mounting nut and disconnect the horn connector, then remove the horn (A). ...

See also:

Components Location
1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Canister close valve (CCV) 6. Fuel level sensor (FLS) 7. ORV ...

Instrument Cluster Components
Pin No. Description Pin No. Description 1 Cluster ground 21 S ground 2 P ground 22 Fuel (-) ...

Special Service Tools
Tool (Number and name) Illustration Use Alternator pulley remover wrench (09373-27000) Removal and installation of alternator pulley ...