Kia Rio: Seat Heater Inspection
| Driver seat and Passenger seat |
| 1. |
Check for continuity and measure the resistance between terminals.
[Cushion]
|
| 2. |
Operate the seat heater after connecting the connector, and then
check the thermostat by measuring the temperature of seat surface.
|
See also:
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be ...
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & G sensor
5. Steering angle sensor
6. ABS Warning lamp
7. Parking brake/EBD warn ...
Specifications
Battery [Non-ISG type]
Item
Specification
Model type
CMF45L-BCI
Capacity [20HR/5HR] (AH)
45/36
Cold Cranking Amperage (A)
...
Copyright © www.kirmanual.com 2014-2024