Kia Rio: Fuses And Relays

Seat Heater Switch Installation

1. Install the seat heater switch. 2. Install the console assembly. 3. Connect the battery (-) terminal. ...

Component Location

1. PCB fuse & relay box (Head lamp low/ hi, Fuel pump #1, HAC, Engine control, Front wiper, Rain sensor, Blower, Cooling fan low/ hi, Horn, Buglar alarm horn, Start relay) ...

See also:

Release Residual Pressure in Fuel Line
   Whenever the high pressure fuel pump, fuel pipe, delivery pipe, or injector is removed immediately after shutting off th ...

Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

TPMS Sensor Description
1. Mode (1) Normal Fixed Base State A. Sensor transmissions continue at the Low Line ...