1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors from the fuse side of the interior junction
box.
|
4. |
Remove the interior junction box(A) after loosening the mounting
nuts (2EA).
|
5. |
Disconnect the connectors from the back side of the smart junction
box.
|
Transaxle Control Module (TCM) Terminal input/ output signal Circuit Diagram
...
35R Clutch Control Solenoid Valve(35R/C_VFS) Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
Starter: Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...