Pin No. |
Description |
Pin No. |
Description |
1 |
Cluster ground |
21 |
S ground |
2 |
P ground |
22 |
Fuel (-) |
3 |
Rheostat output |
23 |
- |
4 |
Rheostat detent output |
24 |
DC-DC (ISG) |
5 |
ALT L output |
25 |
Battery (+) |
6 |
High beam (+) |
26 |
Ignition 1 |
7 |
4P output |
27 |
Speed |
8 |
AT P output |
28 |
- |
9 |
AT N output |
29 |
C_CAN_HIGH |
10 |
AT D output |
30 |
C_CAN_LOW |
11 |
Fuel input |
31 |
B_CAN_LOW |
12 |
- |
32 |
B_CAN_HIGH |
13 |
Parking brake |
33 |
Rheostat up |
14 |
Airbag supply |
34 |
Rheostat down |
15 |
Check engine |
35 |
Cluster signal |
16 |
Water seperator |
36 |
Active ECO |
17 |
- |
37 |
- |
18 |
Immobilizer |
38 |
Oil pressure |
19 |
Key out |
39 |
Battery charge |
20 |
Wahser low |
40 |
Illumination (+) |
Pin No. |
Description |
Pin No. |
Description |
1 |
Cluster ground |
21 |
S ground |
2 |
P ground |
22 |
Fuel (-) |
3 |
Rheostat output |
23 |
- |
4 |
Rheostat detent output |
24 |
DC-DC (ISG) |
5 |
ALT L output |
25 |
Battery (+) |
6 |
High beam (+) |
26 |
Ignition 1 |
7 |
4P output |
27 |
Speed |
8 |
AT P output |
28 |
- |
9 |
AT N output |
29 |
C_CAN_HIGH |
10 |
AT D output |
30 |
C_CAN_LOW |
11 |
Fuel input |
31 |
B_CAN_LOW |
12 |
- |
32 |
B_CAN_HIGH |
13 |
Parking brake |
33 |
Rheostat up |
14 |
Airbag supply |
34 |
Rheostat down |
15 |
Check engine |
35 |
Cluster signal |
16 |
Water seperator |
36 |
Active ECO |
17 |
- |
37 |
- |
18 |
Immobilizer |
38 |
Oil pressure |
19 |
- |
39 |
Battery charge |
20 |
Wahser low |
40 |
Illumination (+) |
Compressor Inspection
1.
Check the plated parts of the disc & hub assembly (A) for color
changes, peeling or other damage. If there is damage, replace the clutch
set.
...
Installation
1.
Install the intake CVVT (A) and exhaust CVVT (B).
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
...
Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...