Kia Rio: Instrument Cluster Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Using a screwdriver or romover, remove the cluster fascia panel
(A).
|
| 3. |
Disconnect the start/stop button connector (A) and hazard switch
connector (B).
|
| 4. |
Using a screwdriver or remover, remove the cluster fascia panel
(A).
|
| 5. |
Remove the cluster fascia (A) from the crash pad after removing
2 screws.
|
| 6. |
Disconnect the cluster fascia connecters (A) and then remove the
cluster.
|
Instrument Cluster Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use wheel chocks
...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the center fascia panel.
...
See also:
Installation
1.
Install in the reverse order of removal.
...
Disassembly
1.
Fix the steering gear box assembly (A) on the vice.
2.
Remove the bellows clip (A) in the direction of the arrow. (The
left and ...
Foot Actuator (With Auto Defogging System) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to BD group - “Crash pad”)
...
Copyright © www.kirmanual.com 2014-2024