1. |
Remove the front door trim.
(Refer to the Body group - Front door)
|
2. |
Remove the front door latch.
(Refer to the Body group - Front door).
|
3. |
Disconnect the connectors from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table.
Check for continuity between the terminals in each switch position
when inserting the key into the door according to the table
[Without key (4Pin)]
[With key (6Pin)]
|
1. |
Remove the rear door trim.
(Refer to the Body group - Rear door)
|
2. |
Remove the rear door latch.
(Refer to the Body group - Rear door)
|
3. |
Disconnect the connectors from the actuator.
|
4. |
Check actuator operation by connecting power and ground according
to the table.
Check for continuity between the terminals in each switch position
when inserting the key into the door according to the table
|
Multimedia Jack Removal
1.
Using a screwdriver or remover, remove the multimidia jack assembly.
...
ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function.
...
Disaseembly
1.
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
2.
Disconnect the heated steering wheel unit ...