1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
3. |
Disconnect the power window switch module connector (A) from the
wiring harness.
|
4. |
Remove the power window switch module (A) from the door trim after
loosening the mounting screws (5EA).
|
AVN Head Unit Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related
parts.
...
Blower Motor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad and heater & blower unit assembly.
(Refer to HA group – “He ...
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...