Kia Rio: Power Door Lock Switch Installation

1.	Install the power window switch module.

2.

Install the door trim panel after reconnecting the relevant connectors

-	Make sure that the power window switch module connectors are plugged properly.

-	Check that the power window switch and door lock switch operate normally.

Power Door Lock Switch Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Power Door Mirrors

...

See also:

Windshield Wiper-Washer Switch Removal
Wiper and Washer Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to the ST group - &qu ...

Check Fuses
A blade type fuse test taps provided to allow checking the fuse itself without removing if from the fuse box. The fuse is good if the test lamp lights up when one lead is connected to the tes ...

Inspection
• Frequent inhalation of brake pad dust, regardless of material composition, could be ha ...

Categories

Copyright © www.kirmanual.com 2014-2024