Kia Rio: Windshield Wiper-Washer Switch Installation

Windshield Wiper-Washer Switch Removal

Wiper and Washer Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to the ST group - &qu ...

Front Wiper Motor Component Location

1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

See also:

Water pump: Troubleshooting
Water Pump Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole of the water pump ...

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh ai ...

Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...