1. |
Install the wiper motor.
|
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
4. |
Install the wiper motor and linkage assembly and then connect
the wiper motor connector.
|
5. |
Install the cowl top cover.
|
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the auto stop position.
A : Glass marking point (Driver)
B : Glass marking point (Assistant)
|
8. |
Set the cowl top cover on the specified spray position.
|
Transaxle Oil Temperature Sensor Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...
Rear Door Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration,
and repl ...
Troubleshooting
Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Pu ...