Kia Rio: Front Washer Motor Installation

1.

Install the washer reservoir.

Before installing the pump motor, check the filter for foreign material or contamination. if necessary, clean the filter into the pump motor.

2.	Install the washer motor.

3.	Install the washer hose.

4.	Connect the washer motor connector.

5.	Install the front wheel guard (RH).

6.	Check the washer motor operation.

Front Washer Motor Removal

- When servicing the washer pump, be careful not to damage the washer pump seal. ...

Rain Sensor Circuit Diagram

...

See also:

Inhibitor Switch Removal
1. Place the shift lever into the "N" position. 2. Remove the air cleaner assembly. (1) Remove t ...

Curtain Airbag (CAB) Module Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Seat Belt Buckle Switch (BS) Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The se ...

Categories

Copyright © www.kirmanual.com 2014-2024