Kia Rio Manuals

Kia Rio: Rain Sensor Installation - Windshield Wiper/Washer - Body Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Rain Sensor Installation


     
•
In case of the windshield with reflection layer which reflects the infrared rays in sensing field, remove the reflection layer from the rain sensor mounting position prior to installation.
•
Avoid contamination of the sensor during installation.
1.
Install the rain sensor bracket to the windshield glass using the tape.



     
It is very important that the coupling pad pushes against the windshield completely to prevent bubbles from forming at the contact surface.
2.
Connect the rain sensor connector, and then install the sensor cover.
Rain Sensor Removal
   The rain sensor may not operate properly if contaminated. Protect the rain sensor surface by not removing the cover unti ...

Rear Wiper/Washer
...

See also:

Hood Adjustment
Hood Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjus ...

Description
Limitations Of The Navigation system GPS Signal Reception State As the GPS satellite frequency is received/transmitted in straight lines, reception may not work if something is placed on ...

Description
- EPS (Electronic Power Steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system ...

Categories


Copyright © www.kirmanual.com 2014-2024