Kia Rio: Rear Wiper Motor Removal
| 1. |
Detach the wiper cap (A) and remove a nut (B).
|
| 2. |
Remove the rear wiper arm & blade (A).
|
| 3. |
Remove the rubber packing (A).
|
| 4. |
Open the tailgate then remove the tailgate trim.
(Refer to the BD group - "Tail gate")
|
| 5. |
Disconnect the rear wiper motor connector (A) then remove the
rear wiper motor (B) after removing 3 bolts.
|
Component Location
1. Head cap
2. Nut
3. Rear wiper arm & Blade
4. Packing (rubber)
5. Rear wiper motor assembly
6. Bolt
...
Rear Wiper Motor Installation
1.
Install the rubber packing.
2.
Install the rear wiper motor assembly.
Tightening torque :
6.86 ~ 9.81N ...
See also:
Heater & A/C Control Unit (MANUAL) Schematic Diagram
...
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
...
Tilting the sunroof
To open the sunroof, push the sunroof control lever upward until the sunroof
moves to the desired position.
To close the sunroof, push the sunroof lever forward or pull downward until the
sunroof ...
Copyright © www.kirmanual.com 2014-2024