1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
4. |
Remove 2 screws on the steering wheel.
|
5. |
Remove the steering wheel cover (A) after loosening 6 screws.
|
6. |
Remove the hands free switch.
|
Water pump: Inspection
1.
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
2.
Check the bearing for damage, abnorma ...
Windshield Wiper-Washer Switch Installation
1.
Install the wiper switch.
2.
Install the steering column upper and lower shrouds.
...
Installation
1.
Replace a clutch cover and disc as a set.
•
...