Kia Rio: Hands free switch Installation
| 1. |
Reassemble the hands free switch after connecting the connector.
|
| 2. |
Reassemble the steering wheel.
|
| 3. |
Reassemble the driver airbag module.
|
Hands free switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring ...
Hands free mic Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to the BD group - "Roof trim")
...
See also:
Rear Hub - Carrier Replacement
[Drum Type]
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Audio Unit Description
Introduction to CD
•
If the temperature inside the car is too high, open the car windows
for ventilation before using your car audio.
•
It is ...
ISG OFF Switch: Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...
Copyright © www.kirmanual.com 2014-2024