1. |
Using a screwdriver or remover, remove the mirror (A) from th
mirror holder.
Becareful not to damage to the clip.
|
2. |
Remove the front cover (A), after loosening 3 screws.
|
3. |
Remove the rear cover (A).
|
4. |
Disconnect the mirror connector.Remove the door mirror turn signal
lamp (A) after loosening screw.
|
Auto Defogging Sensor (FATC only) Description
The Auto Defogging Sensor is installed on the front windshild glass. The
Auto Defogging Sensor senses moisture on the windshild. The air conditioner
control module receives the signal from th ...
Towing
If the vehicle needs to be towed, call a professional towing service.
Never tow vehicle with just a rope or chain. It is very dangerous.
...
Hands free switch Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...