Kia Rio: License Lamp Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the license lamp lens by pushing the clip (A).
|
| 3. |
Replace the lamp bulbs (B) after turning the socket in the counter
clock-wise direction from lens (A).
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
License Lamp Installation
1.
Install the bulb.
2.
Connect the lens and license lamp.
...
See also:
Inspection
Sprockets, Hydraulic Tensioner, Chain
Guide, Tensioner Arm
1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal
wear, cracks or damage. Repla ...
Rear Seat Belt Replacement
Rear Seat Belt Replacement
[5 Door]
•
When installing the belt, make sure not ...
Positive Crankcase Ventilation (PCV) Valve: Operation Principle
...
Copyright © www.kirmanual.com 2014-2024