Kia Rio: Hazard Lamp Switch Installation

Hazard Lamp Switch Removal

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or trim remover, remove the hazard lamp switch (A). ...

Hazard Lamp Switch Inspection

1. Operate the switch and check for continuity between terminals. ...

See also:

Installation
1. Install in the reverse order of removal. ...

Room Lamp Inspection
Room Lamp Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assemlby. ...

Parking Brake Adjustment
   • Re-setting of the parking brake is necessary after overhauling the caliper body, or if ...