1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the lighting switch of the multi-function switch. (Refer
to the multifunction switch)
|
3. |
With the front fog lamp switch, make sure that continuity exists
between the terminals below.
If continuity is not as specified, replace the multi-function
switch.
|
Hazard Lamp Switch Inspection
1.
Operate the switch and check for continuity between terminals.
...
Meaning Of Symbols
There are five primary symbols used to complement illustrations. These
symbols indicate the part to apply such materials during service.
Symbol
Meaning
...
Starter: Description
The starting system includes the battery, starter, solenoid switch, inhibitor
switch (A/T), ignition switch, ignition lock switch, connection wires and the
battery cable.
When the ignitio ...