1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the head lamp assembly (Refer to the head lamp).
|
3. |
Remove the head lamp leveling actuator by turning the adjusting
gear in the hole using the adjusting wheel or screw driver.
|
Instrument Cluster Components
Pin No.
Description
Pin No.
Description
1
Cluster ground
21
S ground
2
P ground
22
Fuel (-)
...
Starter: Reassembly
1.
Reassemble in the reverse order of disassembly.
...
Hood switch Inspection
1.
Disconnect the hood switch connector (A).
2.
Check for continuity between terminals
...