1. |
Install the head lamp leveling actuator by turning the adjusting
gear.
|
2. |
Install the head lamp assembly.
|
3. |
Adjust the head lamp in accordance with the head lamp aiming instructions.
|
Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder assembly
...
Installation
1.
Installation is the reverse of removal.
Coat the clutch clevis push r ...
Oil Pressure Switch: Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter. If there is no continuity, replace the oil pressure switch.
2.
...