Kia Rio: Ignition Switch Assembly Inspection
| 1. |
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
|
| 2. |
Check for continuity between the terminals.
|
| 3. |
If continuity is not specified, replace the switch.
|
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the Audio.
...
Ignition Switch Assembly Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds.
(Refer to the ST group - & ...
See also:
Special Service Tools
Tool (Number and Name)
Illustration
Use
09581-11000
Piston expander
Spreading the front disc brake piston
09580 - 0U000
Brak ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Circuit Diagram
...
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...
Copyright © www.kirmanual.com 2014-2024