Kia Rio: Condenser Inspection
| 1. |
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdriver or pliers.
|
| 2. |
Check the condenser connections for leakage, and repair or replace
it, if required.
|
Compressor Disassembly
1.
Remove the RH front tire.
(Refer to SS group - “Front Tire”)
2.
Remove the engine room RH side under cover.
(Refer to EM grou ...
Condenser Replacement
1.
Recover the refrigerant with a recovery/recycling/charging station.
2.
Disconnect the negative (-) battery terminal.
3.
...
See also:
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions.
Refer to the chart below for the appropriate maintenance intervals.
R : Replace
I : I ...
Steering Angle Sensor (Except MDPS) Description
The steering angle speed sensor detects the angle of the steering wheel
in order to which direction a user chooses.The sensor is detached on the Mutil-Function
Switch (MPS) under the steering ...
Description
-
EPS (Electronic Power Steering, Column assist type) system uses
an electric motor to assist the steering force and it is an engine operation
independent steering system ...
Copyright © www.kirmanual.com 2014-2024