1. |
Recover the refrigerant with a recovery/recycling/charging station.
|
2. |
Disconnect the negative (-) battery terminal.
|
3. |
Remove the front bumper.
(Refer to BD group - “Front Bumper”)
|
4. |
Remove the air guard (A).
|
5. |
Disconnect the discharge line (A) and liquid line (B) from the
condenser.
|
6. |
Remove the condenser (A) from the radiator.
|
7. |
Install in the reverse order of removal.
|
Inhibitor Switch Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
Multimedia Jack Troubleshooting
Symptom
Suspected area
Repairment
Pressing power switch does not turn on system
Radio receiver power source circuit
R-1
LCD module
R ...
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with L wrench
(A).
Tightening torq ...