Kia Rio: Auto Defogging Sensor (FATC only) Description

The Auto Defogging Sensor is installed on the front windshild glass. The Auto Defogging Sensor senses moisture on the windshild. The air conditioner control module receives the signal from the sensor and eliminates fog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the engine room RH side under cover. (Refer to EM group - “Engine and Transax ...

Auto Defogging Sensor (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

See also:

AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fl ...

Circuit Diagram
(M/T) (A/T) ...

Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to th ...