Kia Rio: Auto Defogging Sensor (FATC only) Replacement
| 1. |
Remove the auto defogging sensor cover (A).
|
| 2. |
Disconnect the connector (B) and then remove the auto defogging
sensor (C).
|
| 3. |
Install in the reverse order of removal.
|
Auto Defogging Sensor (FATC only) Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
Display
Fail description
00 ...
Cluster Ionizer (FATC only) Description
The cluster ionizer helps to clean up odors in the vehicle or from the
air-conditioner system.
When the ignition switch ON, the inoizer runs a "CLEAN" mode and then
a "ION& ...
See also:
Shift Lever Components
1. Shift lever knob
2. Shift lever assembly
3. Select cable assembly
4. Shift cable assembly
5. Retainer
...
Specifications
Fuel Delivery System
Items
Specification
Fuel Tank
Capacity
43 lit. (11.4 U.S.gal., 45.4 U.S.qt., 37.8 Imp.qt.)
Fuel Filter
...
Shift Lever Adjustment
Adjusting the control cable
1.
Set room side AT lever(shift lever) and automatic transaxle side
manual control lever to "N" position.
...
Copyright © www.kirmanual.com 2014-2024