1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box.
(Refer to BD group - "Crash Pad")
|
3. |
Disconnect the connector (A) and then remove the cluster ionizer
(B) after loosening the mounting screws.
|
4. |
Install in the reverse order of removal.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...
Circuit Diagram
(M/T)
(A/T)
...
Foot Actuator (With Auto Defogging System) Description
The foot actuator is located at the heater unit. It adjusts position of
the foot door in heater unit of the vehicle equipped with the auto defogging
system. ...