1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver side shower duct (A) after loosening the screw.
|
3. |
Disconnect the connector (A) and then remove the temperature control
actuator (B) after loosening the mounting screws.
|
4. |
Install in the reverse order of removal.
|
Components Location
1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter (LDC)
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake s ...
SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...
ISG OFF Switch: Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...