1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to BD group - “Crash pad”)
|
3. |
Remove the cluster ionizer.
(Refer to HA group - “Cluster Ionizer”)
|
4. |
Disconnect the connector (A) and then remove the foot actuator
(B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
SS-B Solenoid Valve(ON/OFF) Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of below items;
-
Fill vent valve
-
...