1. |
Remove the heater & blower unit.
(Refer to HA group - "Heater Unit")
|
2. |
Separate the blower unit from the heater unit after loosening
the screws.
|
3. |
Install in the reverse order of removal.
|
Crash Pad Replacement
Cluster Replacement
•
A plastic trim tool is recommended, but if prying with
a scre ...
Relay Box (Engine Compartment) Inspection
Replacement of EMS box
1.
Disconnect the negative (-) battery terminal.
2.
Push hooks in the engine room relay box out to the arrow directio ...
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...