1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the connector (A) and then remove the power mosfet
(B) after loosening the mounting screws.
|
3. |
Install in the reverse order of removal.
|
AVN Head Unit Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related
parts.
...
Fuel Pump Removal
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
Ignition Coil: Inspection
1.
Measure the primary coil resistance between terminals (+) and
(-).
Standard value:
0.75Ω ± 15%
...