Kia Rio: Intake Actuator Description - Blower - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2024 Service ManualKia Rio: Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filtar Replacement
1. Open the glove box. 2. Remove the filter cover (A) by pressing the knob. 3. Replace the air filter ( ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving port ...

Warning / Caution Label Locations
1. Fan caution 2. Radiator cap caution 3. Battery caution ...

Copyright © www.kirmanual.com 2014-2024