1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the heater & A/C controller (A) from the center facia using
a flat-head screwdriver or remover.
|
3. |
Disconnect the connectors (A).
|
4. |
Install in the reverse order of removal.
|
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Start/Stop Button Component
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Circuit Diagram
...