1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the heater & A/C controller (A) from the center facia using
a flat-head screwdriver or remover.
|
3. |
Disconnect the connectors (A) and the air hose (B).
|
4. |
Install in the reverse order of removal.
|
Power Mosfet (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) and then remove the power mosfet
(B) after loosening the m ...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...
Positive Crankcase Ventilation (PCV) Valve: Operation Principle
...