1. |
Basically, all measurements in this manual are taken with a tracking
gauge.
|
2. |
When a measuring tape is used, check to be sure there is no elongation,
twisting or bending.
|
3. |
For measuring dimensions, both projected dimensions and actual
- measurement dimensions are used in this manual.
|
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10 ...
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp bulb (Low)
3. Head lamp bulb (High)
4. Dust cover
5. Turn signal lamp bulb
6. Socket
...
Function
Function
Description
Front Washer & Wiper
-
Settings: IGN2 On,
-
Acti ...